Available in five models, the HD360 Series of reciprocating gas compressors feature flow rates of 36 CFM (61.2 m³/hr) at max rpm. These single-stage, two-cylinder gas compressors are available in both air-cooled (HD361/362/363), and liquid-cooled (HDL362/363) models. For precise leakage control and to minimize product contamination, the HD360 Series gas compressors are available in single- (HD361), double- (HD362/HDL362), or triple-seal (HD363/HDL363) models. Compared to competitive compressors, all HD Series Compressors are equipped with thicker and more robust wear parts – piston rings, needle bearings, and high-efficiency valves that will keep the HD Series compressors operating longer than the competition between maintenance cycles. Equipped with an array of features such as a ductile iron head and cylinders, steel pistons and self-adjusting piston rod seals, HD compressors provide maximum performance, energy efficiency, quiet operation, low maintenance cost and reliability under the most severe service conditions.
Performance and Specifications
Single-Stage Models
| Single-Seal Double-Seal Triple-Seal | HD361 HD362/HDL362 HD363/HDL363 |
|---|---|
| Number of Cylinders | 2 |
| Bore, in. (mm) | 4.0 (102) |
| Stroke, in. (mm) | 3.0 (76) |
| Maximum Allowable Working Pressure - psia (bar) | 350 (24.1) |
| Minimum/Maximum rpm | 350 / 825 |
| Piston Displacement @100 rpm - CFM (m³/hr) @Min rpm - CFM (m³/hr) @Max rpm - CFM (m³/hr) | 4.36 (7.41) 15.3 (26.0) 36.0 (61.2) |
| Max. Power, BHP (kW) | 15 (11) |
| Wt. w/Flywheel - lb. (kg) | ˜365 (166) |
| Inlet / Outlet Connections | 1.5" 300# ANSI |
Features and Benefits
- Single-stage models with piston displacements to 36 cfm (61 m3/hr) and working pressures up to 350 psi (24 bar) for use on low to moderate compression ratio applications
- Available in air-cooled or liquid-cooled models
- Available with single-, double- and triple-seal models, providing positive sealing under all operating conditions with materials to suit any application
- Triple-seal models are well suited for handling toxic, hazardous or corrosive gases
Applications:
- Vapor recovery
- Gas gathering
- Gas transfer
- Gas evacuation
- Enhanced recovery
- Gas blanketing
- Pressure boosting
- Flare elimination
- Leak test recovery
- Liquid gas transfer
Common Industrial Gases:
- Ammonia
- Argon
- Butadiene
- Butane
- Carbon Dioxide
- Chlorine
- Ethane
- Ethyl Alcohol
- Helium
- Hydrogen
- Hydrogen Chloride
- Isobutene
- Methyl Chloride
- Nitrogen
- Nitrous Oxide
- Propylene
- Refrigerants
- Sulfur Dioxide
- Vinyl Chloride