Available in air-cooled and liquid-cooled models, the Blackmer HD610 Series two-stage reciprocating gas compressors feature flow rates of 53.7 CFM (91.2 m³/hr) at max rpm. The HD610 Series gas compressors have four models available, the air-cooled (HD612/613), and liquid-cooled (HDL612/613) models. For precise leakage control and to minimize product contamination, the HD610 Series gas compressors offer double- (HD612/HDL612), or triple-seal (HD613/HDL613) models. Compared to competitive compressors, all HD Series Compressors are equipped with thicker and more robust wear parts – piston rings, needle bearings, and high-efficiency valves that will keep the HD Series compressors operating longer than the competition between maintenance cycles. Equipped with an array of features such as a ductile iron head and cylinders, steel pistons and self-adjusting piston rod seals, HD compressors provide maximum performance, energy efficiency, quiet operation, low maintenance cost and reliability under the most severe service conditions.
Performance and Specifications
Two-Stage Models
| Double-Seal Triple-Seal | HD612 / HDL612 HD613 / HDL613 | |
|---|---|---|
| 1st Stage | 2nd Stage | |
| # Cyl. per Stage | 1 | 1 |
| Bore, in. (mm) | 6 (152) | 3.25 (83) |
| Stroke, in. (mm) | 4.0 (102) | |
| Maximum Allowable Working Pressure - psia (bar) | 415 (28.6) | |
| Minimum/Maximum rpm | 350 / 825 | |
| Piston Displacement @100 rpm - CFM (m³/hr) @Min rpm - CFM (m³/hr) @Max rpm - CFM (m³/hr) | 6.54 (11.1) 22.9 (38.9) 53.7 (91.2) | |
| Max. Power, BHP (kW) | 40 (30) | |
| Wt. w/Flywheel, lb. (kg) | ˜775 (352) | |
| Inlet / Outlet NPT, in. | 2.00*/1.50* *Weld type flanges available | |
Features and Benefits
- Two-stage models with piston displacements to 53 cfm (91 m3/hr) and working pressures up to 415 psi (28 bar) for use on higher compression ratio requirements
- Available in air-cooled or liquid-cooled models
- Available with double- and triple-seal models, providing positive sealing under all operating conditions with materials to suit any application
- Triple-seal models are well suited for handling toxic, hazardous or corrosive gases
Applications:
- Vapor recovery
- Gas gathering
- Gas transfer
- Gas evacuation
- Enhanced recovery
- Gas blanketing
- Pressure boosting
- Flare elimination
- Leak test recovery
- Liquid gas transfer
Common Industrial Gases:
- Ammonia
- Argon
- Butadiene
- Butane
- Carbon Dioxide
- Chlorine
- Ethane
- Ethyl Alcohol
- Helium
- Hydrogen
- Hydrogen Chloride
- Isobutene
- Methyl Chloride
- Nitrogen
- Nitrous Oxide
- Propylene
- Refrigerants
- Sulfur Dioxide
- Vinyl Chloride